The
TELE-HIPOS is basically tormed by a central tower where a reductor-engine
is installed. This engine makes the top of the tower turn by means of
a nubber tire. From the top of the tower the arms which hold the separating
pannels are suspended with tensile cables
The structure is heat galvaniced and the screws washed in zinc to avoid
problems of maintenance and not being necessary to paint.
The tower turns through its shaft and two bearings which have been highly
tested on our remountings for snow. It is only necessary to oil it once
a year.
Metallic
pannels are used to separate the horses an they are supplied with a connection
to be able to connect an electric fence, and that way to avoid the animals
touching or stopping the pannels. Also, the lower part of the pannels
are provided with some plastic strips which will try to avoid possible
injuries on the horses extremities.
The control box, Luxe pattern, is very easy to use and can be situated
anywhere chosen by the client It has tive different programes, each ofthem
can prograrn the nme (trom 0 to 10 minutes ) and the velocity, repeatedly
changing direction.
On
the other hand the accelerating and braking ramps which are provided unable
the horses to gradually get to the velocity of walking, trottingr and
cantering that was chosen ar first It also makes a stop every change in
direction and program, of about ceven second to unable the horses to turn
around with eonugh time.
The control box is supplied with a ventilator ( it works everytime
the instalation is switched on ) and a srnall heater or resistance to
avoid condensations and low temperatures, which is also programable
To avoid the bad usage of the programs, the control box is supplied with
a lock with which the workout program can be pre-established and the operator
having only access to the switch to get it going.